Monday 2 July 2012

The Stitch Length Regulator


On older machines the stitch length is regulated by turning the large screw on the pillar of the machine.  For the longest possible stitch, turn the screw all the way in, as shown above...


... and for a smaller stitch, turn the screw out.  Test the stitch length before you thread the machine by stitching on a piece of paper.  You will see how far apart the perforations are and can set the stitch length without using up material and thread.

1 comment:

  1. Thank you! I have just dusted off two of my old singers and did not know how to adjust the stitch. Unlike your's mine are electric with a knee controllers but other than that they look to be almost identical to your's. My model #'s AA546606 and aa55697 and , taken from machines, do not show up in Singer data base.

    ReplyDelete

LinkWithin

Related Posts Plugin for WordPress, Blogger...